Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Need explanation of pointer logic in STL

Created by: hsnaik at: 6/3/2018 2:03 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/3/2018 2:03 PM	Rate (0)
hsnaik Experienced Member Joined: 8/7/2013 Last visit: 3/6/2025 Posts: 90 Rating: (1)	Dear Experts, I need help in understanding the below logic, as i am not familiar with pointer or STL in general. ================================== IN= Numero_Mot_Slave DB_Link DB_Motori OUT= Err TEMP= Numero_Mot_Master Salva_AR2 ================================== OPN #DB_Link L P#0.0 L #Numero_Mot_Slave SLD 5 +D LAR1 L 66 T #Numero_Mot_Master A DBX [AR1,P#2.1] JC indp L DBW [AR1,P#0.0] T #Numero_Mot_Master indp: NOP 0 ================================= OPN #DB_Motori L #Numero_Mot_Slave L 100 D SLD 3 L P#0.0 +D LAR1 TAR2 T #Salva_AR2 L #Numero_Mot_Master L 100 D SLD 3 L P#0.0 +D LAR2

Suggestion To thank Quote Answer

6/3/2018 3:02 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 12/29/2025 Posts: 12477 Rating: (2722)	Hello hsnaik; See if the contents of this discussion answers your question: https://support.industry.siemens.com/tf/eg/en/posts/using-pointers-in-stl/89913/?page=0&pageSize=10 Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on