Logo! Web editor and time values

The problem with the parameters "Lap Time" and "Counter" is the following:
These are DInt values, ie 32 bit integer values. The extended web server can only display Int values, ie 16 bit integer values.

If the counter does not exceed 32,767, this is not a problem.
Example:
Counter via VM mapping in DW0, these are the words VW0 and VW2. In the Web Editor, select the VW2 in the output field.

The stopwatch gets a bit more complicated. If the maximum value of 32,767 is not exceeded, it will be done with the low-order word.

But you have to know how the time value should be displayed, which time base is Chosen.

That's possible.

With a time base on the stopwatch of 1/100 second, a maximum time of 5 minutes, 27 seconds and 67 1/100 seconds is possible.
With a time base on the stopwatch of 1 second, a maximum time of 9 hours, 6 minutes and 7 seconds is possible.

Do you need an example?

miccomus

One little question... If I want analog value (time and counter) text bigger. Is that possible?

No.

Already an answer in advance:

You can not set decimal places for analog values.