Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Unable to Install Simatic manager V5.5

Created by: Mac_Miki at: 3/10/2019 11:10 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/10/2019 11:10 PM	Rate (0)
Mac_Miki Posts: 2 Rating: (0)	I have facing a problem, I am not able to Install Simatic Manager V5.5 in my new laptop, which has the below configuration. OS- Windows 10 Professional Processor- intel i3 6th generation I am able to install siemens TIA a portal V13 and I am using it. But need to install Simatic manager V5.5, Wincc V7.5 and Simatic CFC v8.0. Please help and suggest any solution for that. 6th generation PC is not compatible with Windows XP or Windows server 2003.
Mac_Miki Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/11/2019 6:04 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	Hello, you need Step7 V5.6 for Windows 10. Step7 V5.5 is not compatible with Windows 10. Regards Christoph

Suggestion To thank Quote Answer

3/11/2019 8:50 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 12/17/2025 Posts: 4493 Rating: (644)	Hi, yes, use V5.6 with SP1... Service Pack 1 for STEP 7 V5.6 / Service Release 1 for STEP 7 Professional 2017 Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on