Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

String on LADDER/STL to WinCC

Created by: Rod! at: 4/14/2019 11:56 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

4/14/2019 11:56 PM	Rate (0)
Rod! Posts: 3 Rating: (0)	Hello! I would like some help on how to work with string. I searched a lot and didn't find correctly how to work with. My ask is how to program in ladder/STL and see the string value (text) on wincc. Please could some one drive me? I'll appreciate that. Best, Rodrigo
Rod! Posts: 3 Rating: (0)
Suggestion To thank

4/15/2019 1:21 PM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	Closed cause question posted twice. The second thread with the subject How to type in ladder/STL logic and see the string value (text) on WinCC? is published within the conference STEP 7 / STEP 7 Lite. Best regards Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank
This contribution was helpful to 1 thankful Users Rod!

|

Share this page:

Share this page on...

Follow us on