Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S5 Programming Cable

Created by: a_amer at: 10/11/2008 12:24 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/11/2008 12:24 PM	Rate (0)
a_amer Posts: 9 Rating: (0)	Dear All, I have a lot of Siemens S5 PLCs (spare parts is 50%) in my plan and I need to make some modifications on the PLC programs. We have Step 5 ver. 7.2 setup on Latop with serial interface RS232 communication ports. please advice me which vaild part no. or which cable can be used. Thank for all members
a_amer Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

10/11/2008 2:50 PM	Rate (0)
simaticmanager Posts: 150 Rating: (5)	hi a amer,, wht u need is a TTY Convertor. i use Winshe make TTY convertor it comes with cables required. best wishes simatic manager
simaticmanager Posts: 150 Rating: (5)
Suggestion To thank Quote Answer

10/12/2008 8:41 AM	Rate (0)
umencho Grandmaster-Expert Joined: 3/21/2006 Last visit: 10/16/2025 Posts: 10239 Rating: (1183)	Hi The number of S5-PC converter TTY - RS 232 is MLFB 6ES5 734-1BD20. But this cable on PC side has 25 pins connector and you also need convertor from 25 pins to 9 pins. regards

Suggestion To thank Quote Answer

10/12/2008 9:57 AM	Rate (0)
a_amer Posts: 9 Rating: (0)	Dear Sir, I know the part no. of the S5 programing cable, but as you know most of labtop and PC does't have RS232 ports, so I'm asking aboutprogramming cable based on USB port. Thank a lot
a_amer Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

10/13/2008 1:30 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 12/24/2025 Posts: 9097 Rating: (1202)	Dear a_amer, Please have a look here: http://www.cdelektronik.de/products/S5_PG-USB/s5_pg-usb.html Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on