Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S5 card and ET200U

Created by: Yai at: 10/16/2008 9:53 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/16/2008 9:53 AM	Rate (0)
Yai Posts: 62 Rating: (2)	I would like to add card S5 6ES5 452-8MR11 RELAY OUTPUT 4*30VDC/230VAC into ET200U. Howerver, I cannot find this cardfrom Hardware catalog in S7 hardware configuration, even I update my catalog and install updates SP of S7 V5.4. anyone hasGSD file of this cardor any idea to configure this, please let me know. Thank you in advance Best regards, Jirachai C.
Yai Posts: 62 Rating: (2)
Suggestion To thank Quote Answer

10/16/2008 12:43 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 12/24/2025 Posts: 12472 Rating: (2722)	hello Yai; You can configure "Universal Module" if you do not find the correct module in the HWConfig; just make sure you setup the correct number of bytes (I and Q) required to operate this module. The IM 308C configuration is done with Com Profibus, and downloaded to the module's memory card. Here is a sample program from Siemens showing how to set theIM 308C as a slave to a 315-2DP; it also discusses the use of Universal Modules in the S7 master configuration: http://support.automation.siemens.com/WW/view/en/6556876 Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on