Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

DOTS_SWP

Created by: alifaez at: 8/11/2012 11:10 PM (15 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

3/7/2013 1:58 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	Like a last suggestion -Support Request Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

3/7/2013 2:07 PM	Rate (0)
hneu Posts: 12 Rating: (1)	UMENCHO Like a last suggestion -Support Request Yes, but forum frequently is faster then Support Request regards.
hneu Posts: 12 Rating: (1)
Suggestion To thank Quote Answer

3/7/2013 2:14 PM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating: (1183)	hneu UMENCHO Like a last suggestion -Support Request Yes, but forum frequently is faster then Support Request regards. OFT What can I say - yes, you are right! But from other point of view (later or never) from there for sure must receive an answer. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

12/21/2017 1:38 AM	Rate (0)
mhike Posts: 41 Rating: (2)	Hi alifaez, Did you get the answer for the DOTS_SWP file? I have the same issue, and sometimes I get weird errors specially during compile when the DIOTS_SWP folder is in E: Drive. Thank you! Br Mike
mhike Posts: 41 Rating: (2)
Suggestion To thank Quote Answer

10/24/2018 9:25 AM	Rate (0)
executer01 Posts: 23 Rating: (0)	We made some workaround before, and for us It was seems like SWP file allocates automatically on the drive with most free space. So usually it was big mechanical HDD not a SSD drive that we prefers. But after we moves to VM with single drive on SSD problem was not appears any more.
executer01 Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

7/8/2019 9:10 AM	Rate (1)
wang.yong Member Joined: 12/14/2015 Last visit: 1/12/2026 Posts: 1 Rating: (1)	Hi, I have been paying attention to this problem for a long time, and now I finally got a good news. There is a solution to assign the swap file folder "DOTS_SWP" to a desired partition. This is possible with PCS 7 8.2.x / 9.0.x and the latest CFC updates. Simatic Manager -> Mark Project/Multi-Project -> Options -> Charts -> Settings for swap file... -> Select Hope it's useful for you!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Follow us on