Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Unable to copy the block FB503

Created by: a_car at: 8/1/2019 12:13 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/1/2019 12:13 AM	Rate (0)
a_car Posts: 1 Rating: (0)	I have a similar issue UNABLE TO COPY THE BLOCKS any recomendations ------------------------------------------------------------------------------------------ Split from Download program in S7-300, error "Unable to copy the block OB2".
a_car Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 08/01/2019 07:43:53 New subject after splitting
Suggestion To thank Quote Answer

8/1/2019 4:19 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 1/13/2026 Posts: 36439 Rating: (4547)	a_car I have a similar issue UNABLE TO COPY THE BLOCKS any recomendations What did you see, if you click in the message window on the button "Details"?

Suggestion To thank Quote Answer

8/1/2019 8:08 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 1/7/2026 Posts: 4493 Rating: (644)	Hi, 294:6 means: - This OBxy cannot and must not be downloaded into this CPU. You can possibly use another OBxy with a similar function, which is suitable for this CPU and then download it. - This message appears, if your program has a marker (example M8000.0) which address is not supported in the CPU. Change the address and repeat the download. If the SF LED is not still erased after download, switch the CPU into STOP and after in RUN again. What is the meaning of the error codes (xxxx:yyyy) in STEP 7? Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on