Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

If this product comes...

Created by: Msorich at: 8/8/2019 2:37 PM (5 Replies)

Rating (0)

Thanks 3

6 Entries

8/8/2019 2:37 PM	Rate (0)
Msorich Posts: 661 Rating: (40)	Hello everyone, Could anyone advise me if this product 6ES7510-1DJ01-0AB0 comes with power connector. That's not clear. And... Does anyone have this product on the bench? I would like to see what's covered up by cover. I mean, if there's a real need on purchasing of bus-adapter.6ES7193-6AR00-0AA0. That's also not clear. Thanks in advance! Msorich Attachment 6ES7510-1DJ01-0AB0.png (269 Downloads)
Msorich Posts: 661 Rating: (40)
Suggestion To thank Quote Answer

8/8/2019 3:54 PM	Rate (0)
Azkaban Posts: 224 Rating: (7)	Hi Msorich The power connector is included. The two ports P1 and P2 is under the cover :) The picture is taken from the manual of the product. Best regards Azkaban Msorich Hello everyone, Could anyone advise me if this product 6ES7510-1DJ01-0AB0 comes with power connector. That's not clear. And... Does anyone have this product on the bench? I would like to see what's covered up by cover. I mean, if there's a real need on purchasing of bus-adapter.6ES7193-6AR00-0AA0. That's also not clear. Thanks in advance! Msorich Attachment ET200SP CPU.PNG (275 Downloads)
Azkaban Posts: 224 Rating: (7)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Msorich

8/8/2019 4:31 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 1/12/2026 Posts: 4847 Rating: (512)	Msorich Hello everyone, Could anyone advise me if this product 6ES7510-1DJ01-0AB0 comes with power connector. That's not clear. And... Does anyone have this product on the bench? I would like to see what's covered up by cover. I mean, if there's a real need on purchasing of bus-adapter.6ES7193-6AR00-0AA0. That's also not clear. If 1 PN port is enough for you, then you dont need to buy the bus-adapter.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Msorich

8/8/2019 8:37 PM	Rate (0)
Msorich Posts: 661 Rating: (40)	Azkaban Hi Msorich The power connector is included. The two ports P1 and P2 is under the cover :) The picture is taken from the manual of the product. Best regards Azkaban If judging on the sketch from manual, they are not looking like true rj-45, so they can't be used without bus-adapter. That's pity, it needs to have bus-adapter to be purchased. Msorich
Msorich Posts: 661 Rating: (40)
Suggestion To thank Quote Answer

8/9/2019 11:39 AM	Rate (0)
CaOd Platinum Expert Joined: 5/6/2010 Last visit: 1/10/2026 Posts: 2047 Rating: (285)	Hello Msorich, the ET200SP-CPU have the advantage that they have 3 RJ-45 connectors One is at the upper left side (PN_3) and the other 2 can you use with the adapter. At the adapter are the two ports at the bottom of the adapter. I use this ET200SP-CPU and it's very good to have the third RJ-45. You can connect your programming device directly at th CPU and not only at the next free port at a switch or something like this. Not every machine (cabinet) have a RJ-45 connector outside at the cabinet for maintenance. regards CaOd

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Msorich

8/9/2019 2:16 PM	Rate (0)
Azkaban Posts: 224 Rating: (7)	Yes you are right. The bus-adapter is an optional add-on :) Msorich Azkaban Hi Msorich The power connector is included. The two ports P1 and P2 is under the cover :) The picture is taken from the manual of the product. Best regards Azkaban If judging on the sketch from manual, they are not looking like true rj-45, so they can't be used without bus-adapter. That's pity, it needs to have bus-adapter to be purchased. Msorich
Azkaban Posts: 224 Rating: (7)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on