S5 print software

Dears,

I'm printing a Step5 software where the result is that the forward and backward references are on top and bottom of each segment.

I want the print format where the forward and backward references are on the right and left of each segment.

I'm attaching what I printed and also the required result.

How can I print in the needed format?

If you do not have the STEP5 V7.2 manual, you can download it here:

SIMATIC STEP 5 V7.2 Manual Edition 11/2001

Prerequisite: You must have created a printer file that can implement the appropriate instructions.
The printer file must be able to change the printer to landscape and the line spacing must match the printout.
You also need to create a footer file for 132 characters (xxxxxxF2.INI).

Then you have to create a submit file.
See chapter 19.5 of the manual. But read the entire chapter 19.

I come from Germany. My submit file is of course created in German.
But I have adapted the Content from the english manual.
So they the contents of my control file (in parenthesis only the explanation, they can not be entered):

001 $CHARSET:CHA.                    (Layout: use the IBM character set)
002 $CSF                             (Control System Flowchart (CSF))
003 -Block(R):OB,PB,SB,FB,FX,DB,DX   (Print all blocks with the references)
004 -SYMF:ABS                        (Assignment List: Output sorted acc. To absolute operands)
005 -XRF:PRINTOUT,(X)                (Collective command for all elements)
006 -XRF:IQF                         (Output the I/Q/F list)
007 -BLST                            (Output the block list of the preset program file)
008 -XRF(D):PROGRAM,OB1              (Output the program structure from PB1 with data blocks)
009