Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Problems with Data type "strings"

Created by: ILYAZ at: 11/4/2008 2:30 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/4/2008 2:30 PM	Rate (0)
ILYAZ Posts: 27 Rating: (1)	Dear All, Can some one explain me how to use data type strings. Actually i want to transfer a text of 8 charactersto a variable string decleared asOUTin my FB. I have initialize the string by defining its maximum and actual lengths. For example : i decleared a OUT variable of data type string[16] named as "My_String" LAR1 P# #My_String L 16 T LB [AR1,P#0.0] L 8 T LB [AR1,P#1.0] But how can i move mytext of 8 charactersin to this string variable My_String .If some one provides actual santax in STL ,it will be help full for me. Wainting for your HELP ! ILYAZ
ILYAZ Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

11/4/2008 3:01 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 9/10/2025 Posts: 4416 Rating: (1485)	Hi, just a tip: the first byte of a string is its maximal lenghtof the string. The second byte is the actual lenght of the string. Just after that come the ASCII data. After that you can use some like that (as example, setting the k position as "g") L 'g' T LB [AR1,P#k.0]
	Last edited by: Pegaia at: 11/4/2008 3:03 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/5/2008 7:05 AM	Rate (0)
ILYAZ Posts: 27 Rating: (1)	DearPegaia , Thanks for the help. I have configured "strings in my project. Best Regards, ILYAZ
ILYAZ Posts: 27 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on