Navigation

Step 7 V5.5 on Win 10 Enterprise LTSC 64bit: I dont see my network card

Created by: Krzyzak at: 10/7/2019 9:09 PM (1 Replies)

10/7/2019 9:09 PM	Rate (0)
Krzyzak Posts: 1 Rating: (0)	Hi all I have problem with interface. I instal Step 7 V5.5 on Win 10 Enterprise LTSC 64bit and i dont see my network card. What to do? ------------------------------------------------------------------------------------------ Split from PG/PC interfaces missing. Attachment Łukasz.zip (165 Downloads)
Krzyzak Posts: 1 Rating: (0)	Last edited by: The Helping Hand at: 10/08/2019 13:42:30 New subject after splitting
Suggestion To thank Quote Answer

10/22/2019 8:45 PM	Rate (0)
Tim Karlsson Member Joined: 4/29/2014 Last visit: 1/16/2026 Posts: 3 Rating: (1)	Hi Krzyzak, I'm not sure if this is the cause but Step7 V5.5 is not supported under Windows10 according to the STEP 7 compatibility list. You need V5.6 for Win10 but then you also need to upgrade you license. You can find the full compatibillity list under "C:\Program Files (x86)\siemens\step7\s7komp_b.pdf" Attachment STEP 7 - Compatibility list.png (148 Downloads)
	Last edited by: Tim K at: 10/22/2019 20:51:17
Suggestion To thank Quote Answer