Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Programmin EPROM through PLC

Created by: ofski at: 1/26/2015 5:40 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

1/26/2015 5:40 PM	Rate (0)
ofski Posts: 9 Rating: (0)	Hello, I'm new in this automation area and i want to know if it's possible to load a program from PC to a new EPROM through a plc S5 95U or CPU 115u? Or i should be use a programmer to do this? thank you for the quickly respons
ofski Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

1/26/2015 5:48 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/27/2025 Posts: 36378 Rating: (4545)	No, that's not possible. An EPROM must beerased only by a UV-eraser before a new program can be transferred to the EPROM. The EPROM with a new program to "burn", goes only to PCs with EPROM interface (such as Siemens PGs) or with a special, external PROMMER on the PC.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

11/20/2019 1:07 PM	Rate (0)
LuWiack Experienced Member Joined: 12/2/2015 Last visit: 3/18/2025 Posts: 65 Rating: (7)	or IBH Softec: Attachment EPROM.png (571 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

|

Share this page:

Share this page on...

Follow us on