Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SimoDrive Error F09

Created by: thks at: 11/28/2019 11:17 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/28/2019 11:17 AM	Rate (0)
thks Posts: 1 Rating: (0)	I welded the cable after cutting the wire inside the encoder but after running the machine , it displayed an error F09 in spindle control unit module. having the F09 Fault, is it necessary to do a reset for Simodrive 611 to see if the fault no longer exists or not. and if yes, how to reset the fault code f09 that is displayed. thank you for help.
thks Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/29/2019 5:57 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Hello, F-09 = Motor encoder system is faulty. Check motor encoder cable or motor encoder.
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on