problem with s7313 prog

hi

i have uploaded program from machine that facing problem in its operation i defined the output from manual and go online with cpu to check the prog i didn't find write location for this output and the output is already come according to the prog squence the digital output is connected by profibus

ES7133-1BL11

plc_lover

hi

i have uploaded program from machine that facing problem in its operation i defined the output from manual and go online with cpu to check the prog i didn't find write location for this output and the output is already come according to the prog squence the digital output is connected by profibus

ES7133-1BL11

 Hello,

it's an ET200L...... if you upload Hardware configuration to check the output address?

or

you know your output address? e.g A 2.0 or Q 2.0

Should be AB 2 or QB 2

plc_lover

I know the address from manual it's 10.0 the same as module addresses 

 Hello,

then search like A 10.0 (german mnemonics) or Q 10.0 (english mnemonics) or AB 10 or QB 10

plc_lover

I already did it but I found only read location

 Hello,

with Ctrl+Alt+Q combination ?