Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SIMANTIC .NET CP5611 ET200S

Created by: gtk at: 4/21/2006 7:20 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/21/2006 7:20 PM	Rate (0)
gtk Posts: 1 Rating: (0)	I have to write a Windows application in C++ to read and write digital data on ET200S. I have a CP5611 installed on the PC and SIMANTIC .NET software package. Help, samples, tutorial help me
gtk Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/24/2006 11:45 AM	Rate (0)
Chris Silver Member Joined: 8/31/2005 Last visit: 12/15/2025 Posts: 217 Rating: (41)	Hi gtk! You can use the SIMATIC NET OPC Server to access the ET 200S device. The following example shows, how to write an OPC client in C++ and using an CP5613 (as a DP master). OPC: Controlling with the PC - The SIMATIC NET OPC Inproc Server as DP Master
	Greetings, Chris
Suggestion To thank Quote Answer

4/24/2006 12:29 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello gtk, I would say it is worth a try to see what is going on with the Quick Start CD by SIMATIC NET, because they contain also samples for PB with SOFTNET DP. I have checked and found in the April 2000 CD a sample for CP 5X11 to CP 342-5 ( as DP Slave ). I think this one would help you. If you contact your local SIEMENS Representative they should be able to offer you a copy of this CD. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on