Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

HMI touch panel for S5

Created by: StavrosGR at: 11/26/2008 2:44 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/26/2008 2:44 PM	Rate (0)
StavrosGR Posts: 52 Rating: (4)	Hello We want to replace our old monitors we are using for SCADA with our S5 cpus with new simatic touch panels. The panels should be at least 9 inches. The PLC is S5 AS511 with no DP What would you suggest and do we need any special cables or convertors ?
StavrosGR Posts: 52 Rating: (4)
Suggestion To thank Quote Answer

11/26/2008 3:11 PM	Rate (0)
umencho Diamond Expert Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello Maybe this FAQ:How is the connection between a Windows-based panel and a SIMATIC S5 set up? will help you! regards

Suggestion To thank Quote Answer

11/28/2008 9:27 AM	Rate (0)
StavrosGR Posts: 52 Rating: (4)	Yes it was very helpfull. Thank you very much
StavrosGR Posts: 52 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on