Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Do Automation tools support all types of Simotion/Sinamics?

Created by: Pepsi Cola at: 3/12/2020 8:48 AM (5 Replies)

Rating (2)

Thanks 2

6 Entries

3/12/2020 8:48 AM	Rate (0)
Pepsi Cola Bronze Member Joined: 3/24/2018 Last visit: 9/12/2025 Posts: 237 Rating: (1)	Hi, ChristophD Hi, try it: download automation tool: https://support.industry.siemens.com/cs/de/en/view/98161300 install it and then try to connect/accessible nodes in scout. Regards Christoph Is Automation tools support all types of Simotion/Sinamics? Can we use it for maintenance/modify the setting? Where can find this information? Thank you ------------------------------------------------------------------------------------------ Split from SIMOTION : Can not connect to SIMOTION D.
	Last edited by: Pepsi Cola at: 03/12/2020 08:52:42 Last edited by: Jen_Moderator at: 03/12/2020 12:43:05 New subject after splitting
Suggestion To thank Quote Answer

3/12/2020 8:58 AM	Rate (1)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	this tool doesn't support simotion or sinamics but it install communication drivers which arted damaged on your system and this is a try to repair this drivers or you uninstall scout/step7 and reinstall it

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Pepsi Cola

3/12/2020 9:06 AM	Rate (0)
Pepsi Cola Bronze Member Joined: 3/24/2018 Last visit: 9/12/2025 Posts: 237 Rating: (1)	Hi, ChristophD but it install communication drivers which arted damaged on your system and this is a try to repair this drivers How?
	Last edited by: Pepsi Cola at: 03/12/2020 09:07:13
Suggestion To thank Quote Answer

3/12/2020 9:29 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	how what?

Suggestion To thank Quote Answer

3/12/2020 9:36 AM	Rate (0)
Pepsi Cola Bronze Member Joined: 3/24/2018 Last visit: 9/12/2025 Posts: 237 Rating: (1)	Hi, How automation tool repair this drivers? Procedures?

Suggestion To thank Quote Answer

3/12/2020 9:37 AM	Rate (1)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/19/2025 Posts: 22816 Rating: (3073)	setup.exe the tool refresh the S7DOS drivers which used from Scout/Step7 to communicate with the PLC (PG/PC Interface drivers)
	Last edited by: ChristophD at: 03/12/2020 09:38:06
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Pepsi Cola

|

Share this page:

Share this page on...

Follow us on