Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

help me about STL Loop programme

Created by: mjinux at: 11/25/2008 12:30 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/25/2008 12:30 PM	Rate (0)
mjinux Posts: 6 Rating: (0)	hi, everybody ,I want to use the STL language to achieve the least squares. And i have some problem. I establish a array[1..8,1..2], I want to sum the first row, e.g. array[1,1]+array[1,2]+...+array[1,8]. how to use the loop to achieve the task. Just like the C programme, while and for loop. please help me thanks
mjinux Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

11/26/2008 2:37 PM	Rate (0)
Aret Posts: 2348 Rating: (265)	In case of STL you should use indirect addressing and LOOP. You can find some exaples in this conference.
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

12/3/2008 12:17 PM	Rate (0)
dzwilu Bronze Member Joined: 12/3/2008 Last visit: 3/22/2022 Posts: 146 Rating: (4)	OPN "czasy zakonczen" // opening Data Block.array[1..10] L P#0.0 T #wsk L 10 // execute the loop 10 times next: T #loop_cntr L DBW [#wsk] L 0 ==I // check if array[i]=0?? JCB stp // if then jump to stp L DBW [#wsk] L 1 -D // else decrease the value by 1 T DBW [#wsk] stp: NOP 0 L #wsk L P#2.0 // address +2 because its an integer value (2 bytes) +D // move pointer to the next element of the array T #wsk L #loop_cntr LOOP next end: NOP 0 You can use this program as an example how to do it, just replace the decreasing section with the adding You need :)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on