Compare function cannot be used in win10 and Step7 5.6 SR1

Greetings,

We are testing Step7 in Win10 LTSB 2016, but we found compare function cannot be used.

The dialog just do not show.

EDIT:

Compare function is not available for selecting some FB/FC in blocks in win10 ltsb. Comparing Bausteine/ Block folder is possible. 

Could you reproduce this problem?

If so, I think a hot-fix will be required.

Best Regards.

Problem found, because we used a script

https://github.com/Disassembler0/Win10-Initial-Setup-Script

to reduce the windows 10 problem,

I think step7 5.6 Pro SR1 is using some components that the script disables.

Hoping help someone in future.

EDIT:

Compare function is not available for selecting some FB/FC in blocks in win10 ltsb. Comparing Bausteine/ Block folder is possible.

Best Regards.

C. Change

Hati

I haven't had any problem on using compare function with Win10.

 Please try:

Compare function is not available for selecting some FB/FC in blocks in win10 ltsb. Comparing Bausteine/ Block folder is possible.
 

Could you please try to reproduce?

Have exacly the same problem (Win10 LTSB 1607).

Any suggestion?

There is an update for step7 5.6 sp2

https://support.industry.siemens.com/cs/us/en/view/109773842

https://support.industry.siemens.com/cs/us/en/view/109778416

For me, it is ok for most cases.