Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Power Supply Failure

Created by: majid1359 at: 5/13/2018 12:43 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/13/2018 12:43 PM	Rate (0)
majid1359 Posts: 13 Rating: (0)	I was installing PCS7 software on the IPC547D, suddenly an explosion noise was heard and PC went off. After that I check the power and try to power on the PC but nothing happened. As I understand the power supply has broken. I should tell that I have 3 IPC547D and I could install PCS7 software on those without any problems. Please help me why this problem happened and how can I solve it.
majid1359 Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/9/2020 8:09 PM	Rate (0)
RmnChowdary Posts: 50 Rating: (0)	If possible check inside of IPC smps will be there, Check it once.
RmnChowdary Posts: 50 Rating: (0)	Last edited by: RmnChowdary at: 04/09/2020 20:10:36
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on