Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Problem with "rewire"

Created by: Ltmon at: 12/11/2008 9:34 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

12/11/2008 9:34 AM	Rate (0)
Ltmon Posts: 86 Rating: (5)	Hi, I have a big problem with "rewire". In my project there are calls of FB63 and FB65 (TCON and TSEND). These calls are in a protected FB. I used the function "rewire" to rename the FBs to FB3 and FB5. It doesn't work! Can anybody say to me, why this doesn't work? Please help me! Monty Attachment rewire_en.pdf (410 Downloads)
Ltmon Posts: 86 Rating: (5)
Suggestion To thank Quote Answer

12/15/2008 8:05 AM	Rate (0)
Aret Posts: 2348 Rating: (265)	You can solve your problem in other way (don't know what is exactly wrong with rewire). Choose project symbol (top node of the tree) -> Properties -> Addressing prioritry. There choose Symbol priority. After that if you change in symbol table "TCON" FB3 to "TCON" FB5 every instance of FB3 in your code would be replaced by FB5.
Aret Posts: 2348 Rating: (265)
Suggestion To thank Quote Answer

12/16/2008 8:09 AM	Rate (0)
Ltmon Posts: 86 Rating: (5)	Hi Aret, thank you for your answer. But this doen't work if the FB, in which TCON etc. is called, is KNOW_HOW_PROTECT. I need the absolut adressing and rewiring to change the calls in this protected FB. It's curious, but 1 times the rewiring was okay and the next times it wasn't okay. Any suggestions? Monty
Ltmon Posts: 86 Rating: (5)
Suggestion To thank Quote Answer

12/17/2008 4:54 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 7/2/2025 Posts: 703 Rating: (98)	Hello, what says the rewire protocol(chwinfo.txt) after rewiring? Normaly there is aninformation where the rewire function has changed the requested block, if it can't be rewired, there is a reason why, for example language ID.

Suggestion To thank Quote Answer

12/17/2008 7:49 PM	Rate (0)
Ltmon Posts: 86 Rating: (5)	Hi, I found that it's a bug in Step7 and report this. (Oh no, in reality it's a feature. ) Monty
Ltmon Posts: 86 Rating: (5)
Suggestion To thank Quote Answer

12/18/2008 1:43 PM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 7/2/2025 Posts: 703 Rating: (98)	Strange, I use Step7 V5.4+SP1+HF1 and rewire fct works without any problems even with protected blocks...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on