Navigation

Set PG/PC interface empty

Created by: Damisonic at: 6/29/2020 6:37 PM (1 Replies)

6/29/2020 6:37 PM	Rate (0)
Damisonic Posts: 10 Rating: (0)	whenever i tried to run my simatic manager v5.6 on my window 10 pro and go to set pg/ pc interface it is empty and i can't still add any driver there, so it make it hard to communicate with a plc or use the PLCSIM. Please i need help to resolve this. thanks Attachment Screenshot (107).png (338 Downloads)
Damisonic Posts: 10 Rating: (0)	Last edited by: Damisonic at: 06/29/2020 18:38:31
Suggestion To thank Quote Answer

6/29/2020 6:51 PM	Rate (0)
Ahmed29 Bronze Member Joined: 11/15/2015 Last visit: 12/3/2025 Posts: 180 Rating: (28)	Dear Damisonic Have a look at This Reagards,
	Look for alternative not for the correct answer...if this is helping you rate it.
Suggestion To thank Quote Answer