Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

S7 300 Fm350-2 Missing Filling Problem

Created by: Prentofeny at: 6/18/2020 4:18 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/18/2020 4:18 PM	Rate (0)
Prentofeny Member Joined: 6/18/2020 Last visit: 10/14/2025 Posts: 5 Rating: (0)	Hi friends, We have 4 flowmeters in a machine where we fill the liquid. The operator writes the amount he wants on the operator panel, as well as there are parts where we can read the amount over the flowmeters. As for the problem; Operator is producing 1 few days without problem. Any of the 4 flowmeters that I mentioned (the problem does not happen only in 1 flow meter. All of them can travel all of them.), Even though there are the same amounts in the operator panel, the product that it reads over the flowmeter higher and fills it into the bowl. it's getting less. Transactions made, - If the supply cable of the flowmeters that cause problems is plugged in and plugged in, the problem can be corrected. But it doesn't always improve. - 3 different flowmeters were used in the system. The same problem was seen in all of them. - Calibration of each flow meter according to the product was made. But still the result is the same. - There were S5 Siemens and Bopp Reuther flowmeters on the machine. Since these are old, S7 300 and Krohne brand flowmeters were switched. Before this conversion, the machine was not such a problem. Cpu Model : CPU 314C-2 PN/DP Counter Model : FM-350-2 Thank you in advance for your comments on this issue.
	Last edited by: Prentofeny at: 06/18/2020 16:24:08
Suggestion To thank Quote Answer

7/2/2020 8:28 AM	Rate (0)
Prentofeny Member Joined: 6/18/2020 Last visit: 10/14/2025 Posts: 5 Rating: (0)	Does anyone know anything about this ?

Suggestion To thank Quote Answer

7/2/2020 10:57 AM	Rate (0)
8Noodles Posts: 1086 Rating: (53)	Hi Prentofeny, can you tell us, which Software you are using and maybe you can show us your programm/ a screenshot from what you have already done?
8Noodles Posts: 1086 Rating: (53)
Suggestion To thank Quote Answer

7/2/2020 12:53 PM	Rate (0)
RReza Silver Member Joined: 9/6/2015 Last visit: 12/21/2025 Posts: 141 Rating: (9)	What is your exact type of flow meter? Do you have the order number?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on