Navigation

ALM instal problem

Created by: Lobolobo at: 12/30/2008 8:11 PM (1 Replies)

12/30/2008 8:11 PM	Rate (0)
Lobolobo Posts: 1 Rating: (0)	Winccflexible 2008 and Simatic Manager doesn't work anymore due to problems with ALM V4.0. After de-install ALM V4.0 and removing of file almdb.mdb, installing of ALM V3.0 SP1 or ALM V4.0 is not possible anymore. The setup manager stops and presents the message "restart windows and then start setup again". Reboot doesn't solve the problem. Has somebody suggestions?
Lobolobo Posts: 1 Rating: (0)	Last edited by: Lobolobo at: 12/30/2008 8:37 PM Last edited by: Lobolobo at: 12/30/2008 8:35 PM
Suggestion To thank Quote Answer

12/31/2008 9:09 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 7/31/2025 Posts: 9027 Rating: (1199)	Dear Lobolobo, Please have a look at this faq: http://support.automation.siemens.com/WW/view/en/8861819 It might help you. Best regards, Wizard

Suggestion To thank Quote Answer