Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Uploading setpoints from active station

Created by: DaveA at: 1/5/2009 10:33 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/5/2009 10:33 AM	Rate (0)
DaveA Experienced Member Joined: 8/8/2008 Last visit: 12/5/2024 Posts: 78 Rating: (4)	Happy new year all! Can anyone explain to me how I upload setpoints from a running S7 300 system? In the DB where the setpoints are storedI can find the function that overites actual values with initial values but not the other way round? I am confised

Suggestion To thank Quote Answer

1/5/2009 11:16 AM	Rate (0)
DaveA Experienced Member Joined: 8/8/2008 Last visit: 12/5/2024 Posts: 78 Rating: (4)	Think I found out how to do it. By uploading the DB in online mode. Is this correct?

Suggestion To thank Quote Answer

1/5/2009 11:32 AM	Rate (0)
umencho Grandmaster Joined: 3/21/2006 Last visit: 10/16/2025 Posts: 10239 Rating: (1183)	Hello DaveA, With upload you will take actual value of DBs. And if for you this acual value is exactly setpoints - OK. regards

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on