Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

NO ACCESS POINT IN STEP 7 V 5.5 SOFTWARE

Created by: sgonz113 at: 7/30/2020 8:04 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

7/30/2020 8:04 PM	Rate (0)
sgonz113 Posts: 4 Rating: (0)	Hello, I wanted to ask, I have a problem when installing STEP7 5.5 I don't have any interface to communicate with the PLC Attachment Picture1.png (244 Downloads)
sgonz113 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/30/2020 8:12 PM	Rate (0)
Madadi Bronze Member Joined: 12/28/2016 Last visit: 12/14/2025 Posts: 435 Rating: (55)	Hello what is your Windows? What is the software version of step 7 you use?
	https://pnap.ir If this Information really helps, you could use the Rate function😉
Suggestion To thank Quote Answer

7/30/2020 8:13 PM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 11/27/2025 Posts: 10970 Rating: (844)	Hello, OS version (full info)? Update: ok I can offer this link of Forum Topic: PG/PC interfaces are missing
	Last edited by: Duris_I at: 07/30/2020 20:30:59 With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

7/30/2020 8:30 PM	Rate (0)
sgonz113 Posts: 4 Rating: (0)	Hi Thanks its a Windows 7 Professional System type 64 bit Operating System Step V5.5 +SP1
sgonz113 Posts: 4 Rating: (0)	Last edited by: sgonz113 at: 07/30/2020 20:35:56
Suggestion To thank Quote Answer

7/30/2020 8:31 PM	Rate (0)
Duris_I Diamond Member Joined: 4/28/2015 Last visit: 11/27/2025 Posts: 10970 Rating: (844)	Hello, my previous post update...
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

7/30/2020 8:36 PM	Rate (0)
sgonz113 Posts: 4 Rating: (0)	Thanks
sgonz113 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on