Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

need for help

Created by: Youcef Tech at: 10/18/2020 3:47 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/18/2020 3:47 PM	Rate (0)
Youcef Tech Posts: 3 Rating: (0)	hi every one i have a problem with some blocs .. i used the scale block and i have tried to compare the output type REAL MD 100 with another number (10.0) but i can"t do that with comparing blocks .. you can check the pic below Attachment 1.PNG (199 Downloads)
Youcef Tech Posts: 3 Rating: (0)	Last edited by: Youcef Tech at: 10/18/2020 15:49:55
Suggestion To thank

10/19/2020 6:05 AM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	Closed cause question posted twice. The second thread with the subject need for help is published within the conference STEP 7 / STEP 7 Lite. Best regards, Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on