Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Alarms from log

Created by: Dzintars at: 5/8/2006 5:37 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/8/2006 5:37 PM	Rate (0)
Dzintars Posts: 18 Rating: (0)	How is possible to show only activated alarms (no acknowledged, no deactivated) in alarm window from log?
Dzintars Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

5/9/2006 9:37 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/23/2025 Posts: 9089 Rating: (1202)	Hello, I think you should use an other alarm window, with properties: Display: Alarms, with the options: pending alarms and Unacknowledged alarms. Then the alarm view shows the actual alarms. They also appear in the alarm log. So you canfor example show two different Alarm viewsin a screen, -one from the alarm log, showing all alarms even the one's not actual. - one showing the actual alarms. Pay attention, the alarm view showing the alarm log:when the screen is opened, thealarmlog is updated. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on