Data type is not permitted

Dear all,

I have an upload project and want to add new profibus device after adding save and compile project in HW download cpu goes to Stop mode.

so i use from tap PLC>compile and download object,i have some error but cpu in Rum mode but some devices not work

poto1=error

poto2=before compile

poto3=after compile

were is problem?

Krono314

 

MohamadReza.Sharif

Dear all,

I have an upload project and want to add new profibus device after adding save and compile project in HW download cpu goes to Stop mode.

so i use from tap PLC>compile and download object,i have some error but cpu in Rum mode but some devices not work

poto1=error

poto2=before compile

poto3=after compile

were is problem?

 

Hi  !

What datatyper are "Fullr..." and "Pumpe..."? Are those  UDTs?

Check supported datatyper and how to make UDTs in SIMATIC Programming with STEP 7

chapters "9.3.2 Using User-Defined Data Types to Access Data" and "26.3 Data Types and Parameter Types"

 Hi

Tanks for help,when i compile upload project without any change this error happened.

Closed cause question posted twice.

The second thread with the subject Data type is not permitted is published within the conference STEP 7 / STEP 7 Lite.

Best regards,
Jen_Moderator
​