Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

MPI & PPI interfaces lost!!!!!!!!!!!

Created by: Tomy Master at: 3/8/2011 10:46 PM (34 Replies)

Rating (11)

Thanks 3

Result pages:: |; 1 | 2 | 3 | 4; |

35 Entries

Entries per page: 10 | 20 | all

3/11/2011 3:52 PM	Rate (1)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Are you sure PC Adapter (USB) exist? You need settings in registry for PPI adapter as I understood. Anyway I'll try on Monday to find it, but hope you will find it until thismoment. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

3/29/2011 9:57 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/23/2024 Posts: 914 Rating: (40)	Dear friend, Now the problem returned! Every time i go to Options-->Set PG/PC Interface, it shows me the attached pic. And as a result there are no PC Adapter(MPI) or PC/PPI adapter. Please, show me the way. Regards. Tomy Attachment Set PG-PC interface.gif (302 Downloads)
	Aim Higher
Suggestion To thank Quote Answer

3/29/2011 10:20 AM	Rate (2)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	This is a normal behaviour. The problem is why doesn't discover PC Adapter after? When this started, did you installed some Siemens software just before? Try with reinstall of Microwin. And after durring installation select PG/PC Intereface for online - PC Adapter (PPI). Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

3/30/2011 1:09 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/23/2024 Posts: 914 Rating: (40)	I tried but, the problem still exists
	Aim Higher
Suggestion To thank Quote Answer

3/30/2011 11:28 AM	Rate (1)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	The last 'hard' way - fresh installation of Windows. It is a long and unpleasant way but sometime is the last available with almost 100% chance. Or to uninstall all Siemens software and then one by one to install them but meanwhile to test PG/PC Interface after each installed there. You didn't mention what kind of OS have - this Windows7... Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

3/30/2011 3:16 PM	Rate (0)
Heksu Bronze Member Joined: 12/12/2005 Last visit: 3/17/2024 Posts: 180 Rating: (12)	Hi Tomy Master, I agree with Umencho, it might be easiest way. Anyway you meet this problem again after some time. First problem was over three weeks ago. I like also know what is your OS and do you use meny siemens programs in this time. Do you have internet connection in this programmingPC. Check if windows have done some updates before this problem came again. You have firewall working again? best regards Heksu p.s.I had once many days problem when I updated MS XP to SP2, it takes lot of work to get integration work again between Step 7 and winccflexible.
	"Beer is proof that God loves us and wants us to be Happy"-Benjamin Franklin
Suggestion To thank Quote Answer

4/5/2011 2:24 PM	Rate (0)
I/O Posts: 8 Rating: (0)	hi tomy master i hv encountered the same problem u had, but i hope its ok now, but if its still exist, it is possible that your anti virus program is getting rid of the files needed to run the MPI & PPI interfaces or just completely deleting it.. .(cause thats what happened in my case)..(maybe u run/scanor cleaning up ur PC/laptop) what i did before is that i just insert the Simatic Manager disc and choose Repair. after the repair was done i was able to use both interfaces again. more power to all! I/O
I/O Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

4/13/2011 1:47 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 8/8/2025 Posts: 2198 Rating: (331)	Please note: With Win 7 (only 32 Bit Ultimate, Professional or Enterprise) you need STEP 7 V5.5. Older Step 7 versions will not work. There are no drivers for Win 7 64 Bit! http://support.automation.siemens.com/WW/view/en/24059047

Suggestion To thank Quote Answer

4/14/2011 11:46 AM	Rate (0)
Tomy Master Gold Member Joined: 5/4/2009 Last visit: 11/23/2024 Posts: 914 Rating: (40)	Dear friends, Here are some details about my PC and softwares already installed on it: Windows7 Ultimate (32-bit). Step7 V5.5. Step7 Basic + SP2. Step7 Micro/Win + SP7. PCT Tool. CA01. WinCC Flexible 2008 Advanced + SP2. LOGO! Software V6.1. I hope that these info would help. Regards. Tomy.
	Aim Higher
Suggestion To thank Quote Answer

6/6/2011 2:52 PM	Rate (0)
Heksu Bronze Member Joined: 12/12/2005 Last visit: 3/17/2024 Posts: 180 Rating: (12)	Hi Tomy Master, Do you still have same problem? regards Heksu
	"Beer is proof that God loves us and wants us to be Happy"-Benjamin Franklin
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

35 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Follow us on