Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Tia V17, Extended download to device pop-up

Created by: Amritpal at: 12/3/2024 8:09 AM (11 Replies)

Rating (2)

Thanks 0

12 Entries

Entries per page: 10 | all

12/3/2024 8:09 AM	Rate (1)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	Hi, Can anyone tell me how to turn off the "Extended download to device" pop-up. My system is already online with the PLC, when I am trying to download the program to the PLC then every time this pop-up appears and it is wasting a lot of time. Attachment Pop-up.PNG (216 Downloads)
	Regards, Amritpal
Suggestion To thank Quote Answer

12/3/2024 10:34 AM	Rate (1)
JimHalpert Joined: 7/11/2024 Last visit: 9/9/2025 Posts: 200 Rating: (27)	Hi Amritpal Have you tried setting the connection parameters as default under "Options > Settings > Online & Diagnostics"? See the attached picture Good luck! Attachment defaulConnectionPath.png (206 Downloads)
	If this post has been useful, don't forget to rate it!😊
Suggestion To thank Quote Answer

12/3/2024 11:37 AM	Rate (0)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	Hi, Thanks for the reply. I have done the settings as mentioned in attached picture, but still pop-up appears again and again. JimHalpert Hi Amritpal Have you tried setting the connection parameters as default under "Options > Settings > Online & Diagnostics"? See the attached picture Good luck! Attachment Settings.PNG (195 Downloads)
	Last edited by: Amritpal at: 12/03/2024 11:38:19 Regards, Amritpal
Suggestion To thank Quote Answer

12/3/2024 12:33 PM	Rate (0)
JimHalpert Joined: 7/11/2024 Last visit: 9/9/2025 Posts: 200 Rating: (27)	Ok, then.. Have you tried restarting TIA Portal after making this changes? Which TIA v17 update are you using? Is the CPU firmware up to date?
	If this post has been useful, don't forget to rate it!😊
Suggestion To thank Quote Answer

12/3/2024 12:47 PM	Rate (0)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	Point wise reply of your questions:- Yes, Same issue even after restart the PC Picture is attached for reference Yes, It is up to date. JimHalpert Ok, then.. Have you tried restarting TIA Portal after making this changes? Which TIA v17 update are you using? Is the CPU firmware up to date? Attachment Versions.PNG (169 Downloads)
	Last edited by: Amritpal at: 12/03/2024 12:48:35 Regards, Amritpal
Suggestion To thank Quote Answer

12/3/2024 3:07 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 9/12/2025 Posts: 16094 Rating: (2515)	Right-click on the PLC you want to update. Then select download. Because your project has multiple PLCs, the toolbar download button does not know which PLC you wish to download to, so it forces you to choose. If you simply force TIA Portal's attention to the correct PLC by right-clicking on it in the project tree, it knows which PLC and offers the download option without popping up a selection prompt. Amritpal Hi, Can anyone tell me how to turn off the "Extended download to device" pop-up. My system is already online with the PLC, when I am trying to download the program to the PLC then every time this pop-up appears and it is wasting a lot of time.
	science guy
Suggestion To thank Quote Answer

12/4/2024 2:51 AM	Rate (0)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	Hello, I also tried to download the program after select the PLC as you mentioned, but still the pop-up appears, and I was trying to download the program directly from the FB or OB. 0_Einstein Right-click on the PLC you want to update. Then select download. Because your project has multiple PLCs, the toolbar download button does not know which PLC you wish to download to, so it forces you to choose. If you simply force TIA Portal's attention to the correct PLC by right-clicking on it in the project tree, it knows which PLC and offers the download option without popping up a selection prompt. Attachment Pop-up.PNG (168 Downloads)
	Regards, Amritpal
Suggestion To thank Quote Answer

12/4/2024 4:45 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 9/12/2025 Posts: 16094 Rating: (2515)	Are you using an s7-300/400 PLC and are accustomed to classic step 7 where you were allowed to download a single FB or OB? In TIA Portal, you can no longer do that (100% certain for S7-1200/1500, but not 100% for s7-300/400, but like 99% certain). Amritpal Hello, I also tried to download the program after select the PLC as you mentioned, but still the pop-up appears, and I was trying to download the program directly from the FB or OB. 0_Einstein Right-click on the PLC you want to update. Then select download. Because your project has multiple PLCs, the toolbar download button does not know which PLC you wish to download to, so it forces you to choose. If you simply force TIA Portal's attention to the correct PLC by right-clicking on it in the project tree, it knows which PLC and offers the download option without popping up a selection prompt.
	science guy
Suggestion To thank Quote Answer

12/5/2024 3:16 AM	Rate (0)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	I am using CPU 1515R-2PN with redundancy, and I am not downloading selected FB or OB as it is not possible. Open any FB or OB --> Right click--> Download to device. and all FB's and OB's will be downloaded. 0_Einstein Are you using an s7-300/400 PLC and are accustomed to classic step 7 where you were allowed to download a single FB or OB? In TIA Portal, you can no longer do that (100% certain for S7-1200/1500, but not 100% for s7-300/400, but like 99% certain).
	Regards, Amritpal
Suggestion To thank Quote Answer

12/26/2024 8:02 AM	Rate (0)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	Hi, Would anyone like to give any more suggestions?
	Regards, Amritpal
Suggestion To thank Quote Answer

1/1/2025 12:03 PM	Rate (0)
AS_R Bronze Member Joined: 12/15/2011 Last visit: 1/2/2025 Posts: 56 Rating: (4)	Hi, Please refer the below link to download the 1515R-2pn redundancy manual and downloading procedure. S7-1500R/H redundant system Regards,

Suggestion To thank Quote Answer

1/2/2025 2:53 AM	Rate (0)
Amritpal Bronze Member Joined: 8/5/2014 Last visit: 9/10/2025 Posts: 191 Rating: (27)	Hi, Thanks for the reply. I am facing this issue with all the CPU's (1511, 1513, 1515R). I think there may be some common setting to disable this pop-up to do not appear again and again. AS_R Hi, Please refer the below link to download the 1515R-2pn redundancy manual and downloading procedure. S7-1500R/H redundant system Regards,
	Regards, Amritpal
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on