Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Topology problem in Simotion SCOUT

Created by: Kristoffel at: 1/28/2010 4:26 PM (12 Replies)

Rating (0)

Thanks 0

13 Entries

Entries per page: 10 | all

1/28/2010 4:26 PM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	I experience problems that when I click on Topology under Sinamics_integrated, Simotion Scout shuts down immediately...in the past I was able to go to the topology but now it is no longer possible. Reinstalling software completely was no help to solve the problem. Anyone any ideas?
Kristoffel Posts: 31 Rating: (0)	Last edited by: Kristoffel at: 1/28/2010 4:26 PM
Suggestion To thank Quote Answer

1/28/2010 4:41 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/15/2025 Posts: 22710 Rating: (3071)	Hello, which Version of Scout do you use noe and before? Regards Christoph

Suggestion To thank Quote Answer

1/28/2010 5:05 PM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	Product: SCOUT Release: V4.1.4.1 Copyright (c) 1999-2009, Siemens AG. All rights reserved. Portions copyright 1991-2002 Compuware Corporation. Internal Identifier: 47.76.10.00 Internal Info: umc47.76.10release.1.vobadm Always have worked with the same version....I'm busy getting to know the Scout software after 3 days training....
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

1/29/2010 7:54 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/15/2025 Posts: 22710 Rating: (3071)	Hello, close Scout. go to the directory <Step7Installpath>/Siemens/step7/u7umc/data/wrkbnch delete all *persi.datFiles in the directory. restart Scout an look if topology is working now. Regards Christoph

Suggestion To thank Quote Answer

1/29/2010 9:30 AM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	No help, I deleted the 3 *Persi.dat files, but no use. Those three files always come back when I start Scout, but Ipresume this is normal.. See attachment for my workbench. Attachment Clipboard02.jpg (537 Downloads)
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

1/29/2010 10:46 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/15/2025 Posts: 22710 Rating: (3071)	Hello, the three files automatic created during Scout Startup. Can you post the project here? It can be thats the topology of the project is damaged. Or you can test if the project works when you export it and import it. Regards Christoph

Suggestion To thank Quote Answer

1/29/2010 11:59 AM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	This is the project, but I have also the same problems with new created projects and so on... I tried the import and export, but no solution. Attachment Tijdelijk.zip (587 Downloads)
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

1/29/2010 1:16 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/15/2025 Posts: 22710 Rating: (3071)	Hello, i have tested the project but no error occurrs. I can open the topology without Problems. Please can you look in the Directory Siemens/step7/s7tmp if there any file with endeing .rpt? Ragrds Christoph Attachment SIMOTION V4.1.4.1-2010-01-29-13-04-25.JPG (545 Downloads)

Suggestion To thank Quote Answer

1/29/2010 1:55 PM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	Several, see attachment.... Attachment Clipboard02.jpg (553 Downloads)
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

1/29/2010 2:44 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/15/2025 Posts: 22710 Rating: (3071)	Hi, no RPT File from SIMOTION. Which OS and IE Version do you use? Can you make a overview of SIEMENS SW which is installed on you computer. (open SIMATIC Manager -> Help -> About -> installed Software -> Display) export the Products and the Components tab please. Regards Christoph

Suggestion To thank Quote Answer

2/1/2010 11:00 AM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	First attachment... Attachment Components.pdf (516 Downloads)
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

2/1/2010 11:02 AM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	Second... Attachment Products.pdf (546 Downloads)
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

2/3/2010 1:23 PM	Rate (0)
Kristoffel Posts: 31 Rating: (0)	Connection through ethernet on port X130 of D425 solved the problem, probably the cause will be the speed of the Sinamics integrated is not compatible to the transmission speed of the USB PC adapter I use to connect to the D425.
Kristoffel Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on