Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

VACON 100 and PLC comm via Profinet

Created by: sipisniks at: 12/28/2016 10:36 PM (15 Replies)

Rating (0)

Thanks 3

16 Entries

Entries per page: 10 | all

12/28/2016 10:36 PM	Rate (0)
sipisniks Posts: 2 Rating: (0)	Greetings all, I`m struggling with with data exchange between Vacon 100 drive and PLC via Profinet connection. I have GSD file, I don`t have faults in communications, Vacon is sending data, but PLC don`t see it and I have feeling that I have missed something, probably someone have some experience with similar case and can help me? Please, see attached picture for more information. Attachment picture.jpg (1856 Downloads)
sipisniks Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/29/2016 1:53 PM	Rate (0)
sipisniks Posts: 2 Rating: (0)	Solved. As I was thinking, it was something small. I forgot to put '':P'' after tags when I was processing them to DB :-)
sipisniks Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users CS Moderator Gajender singh

7/7/2017 4:40 AM	Rate (0)
jerick05 Posts: 2 Rating: (0)	Good day, Can i have a copy of your configuration in the PLC and Vacon side, im about to commission the same set up and it would be a great help to have a reference like yours. thanks a lot.
jerick05 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/8/2017 10:53 AM	Rate (0)
Hozefa Regular Member Joined: 4/10/2016 Last visit: 5/25/2024 Posts: 6 Rating: (2)	would you please send to me the program i am tring connect PLC S7-1200 with Vacon 100 --Deleted E-Mail--
	Last edited by: Jen_Moderator at: 10/9/2017 10:48:14 AM Deleted E-Mail address.
Suggestion To thank Quote Answer

11/21/2017 11:46 AM	Rate (0)
Wagner_Amarall Regular Member Joined: 4/28/2015 Last visit: 2/29/2024 Posts: 8 Rating: (1)	Hellow.... I'm facing with this too, I have a S1200 and vacon 100. But, in my case I have a ethernet switch between PLC and Vacon. Can U send the blocks and a print of the HwConfiguration for take like example? Tks

Suggestion To thank Quote Answer

3/4/2018 6:55 PM	Rate (0)
Jari007 Posts: 1 Rating: (0)	Hello Would you do a great favor to sent me piece of that program to communicate to vacon 100, I have also S7 1200 and have difficulties to communicate Br. Jari
Jari007 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/5/2018 8:43 AM	Rate (0)
Duris_I Diamond Expert Joined: 4/28/2015 Last visit: 4/19/2025 Posts: 10876 Rating: (837)	Hello Jari, check for first some topics here in Forum, you can try use search box on right up corner of this page. Look to this list of topics depended to Vacon and select what can be helpful to you (link): List of topics with Vacon communication
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

2/26/2019 12:21 AM	Rate (0)
JCMOTION Member Joined: 10/29/2018 Last visit: 5/19/2021 Posts: 1 Rating: (0)	Hola, tengo funcionando dos variadores vacon por profinet mi correo es [snip] ... JCMOTION
	Last edited by: Jen_Moderator at: 2/26/2019 6:41:53 AM Removed E-Mail address.
Suggestion To thank Quote Answer

2/26/2019 6:45 AM	Rate (0)
8Noodles Silver Member Joined: 8/3/2017 Last visit: 6/11/2024 Posts: 1086 Rating: (53)	Hi jcmotiion, Este es un foro donde usamos el inglés como idioma. Si tienes un problema, explícalo con más detalle. ______________ This is an english Forum so please use this language, if you want help. Translation: jcmotion Hello, I have running two vacon drives by profinet my mail is [snip] Best regards, Noodles
	Please, check out the forum search to find already existing topics regarding your issue and to get some hints.
Suggestion To thank Quote Answer

8/13/2024 2:30 PM	Rate (0)
Gajender singh Joined: 12/2/2022 Last visit: 7/14/2025 Posts: 2 Rating: (0)	hello sipisniks, can you send me your project. i am using the same set for my project and suffer to get data in db. please it will be very helpful for me. [snip...]
	Last edited by: Moderator_Lan at: 08/14/2024 06:57:57 E-Mail address removed, doesn't comply with forum terms.
Suggestion To thank Quote Answer

10/26/2024 3:44 AM	Rate (0)
smehmood Posts: 1 Rating: (0)	IF ANYBODY HAVE VACON 100 VFD PROFINET GSD FILE. SO PLEASE SHARE
smehmood Posts: 1 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users U_d8fbf0c3-e813-4...

7/12/2025 5:54 PM	Rate (0)
JavierLince Member Joined: 6/4/2022 Last visit: 7/12/2025 Posts: 1 Rating: (0)	I hope you are well! Attachment VACON_100_FLOW.zip (60 Downloads)

Suggestion To thank Quote Answer

8/1/2025 6:19 AM	Rate (0)
RIAN Che Bronze Member Joined: 1/2/2014 Last visit: 8/25/2025 Posts: 160 Rating: (22)	Hello @sipisniks Can you share the first GSDML file mentioned in the photo vacon 100 , 2012 V2.1? I am in urgent need. sipisniks Greetings all, I`m struggling with with data exchange between Vacon 100 drive and PLC via Profinet connection. I have GSD file, I don`t have faults in communications, Vacon is sending data, but PLC don`t see it and I have feeling that I have missed something, probably someone have some experience with similar case and can help me? Please, see attached picture for more information.

Suggestion To thank Quote Answer

8/1/2025 10:58 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 9/3/2025 Posts: 4702 Rating: (509)	RIAN Che Hello @sipisniks Can you share the first GSDML file mentioned in the photo vacon 100 , 2012 V2.1? I am in urgent need. sipisniks Greetings all, I`m struggling with with data exchange between Vacon 100 drive and PLC via Profinet connection. I have GSD file, I don`t have faults in communications, Vacon is sending data, but PLC don`t see it and I have feeling that I have missed something, probably someone have some experience with similar case and can help me? Please, see attached picture for more information. sipisniks is not a member of this forum anymore.

Suggestion To thank Quote Answer

8/4/2025 2:09 PM	Rate (0)
AutoGen_5860482 Joined: 4/27/2024 Last visit: 8/4/2025 Posts: 4 Rating: (0)	Did you manage to get it working ?? i'am trying for a few weeks now and have no luck……can you please send me TIA file ???? many thanks…
	Last edited by: Moderator_Lan at: 08/04/2025 14:24:24 E-Mail address removed, doesn't comply with forum terms.
Suggestion To thank Quote Answer

8/12/2025 8:19 AM	Rate (0)
RIAN Che Bronze Member Joined: 1/2/2014 Last visit: 8/25/2025 Posts: 160 Rating: (22)	I managed to get the GSDML file. Link here.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on