Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

COROS LS-B

Created by: srik11 at: 11/12/2007 5:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/12/2007 5:27 AM	Rate (0)
srik11 Posts: 10 Rating: (0)	We have an operating station with COROS LS-B linked with S5 PLCs through sinec H1.Computer having CP1413 processor. Now the PC hard disk has failed .Now I need to reinstall coros LS-B. How to establish the communication between PLC and coros LS-B? I installed the COROS LS-B in a computer with win98 OS. I loaded the default file from profiels in LSBSET. Still it is not communicating. do I need to do configuration of sinec H1?
srik11 Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

11/12/2007 9:13 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, its a real old system. Maybe the old FAQs can give You some help. See: http://support.automation.siemens.com/WW/view/de/10805620/133000 Search for CP1413 Good Luck April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

12/16/2007 7:37 PM	Rate (0)
Late Platinum Member Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, You need some installation of Network software and the file to couple to the PLC(s). If you have a good backup then please check if you have installed everything...... Was it already on a Win95 system or was it on FLEXOS...
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

3/12/2008 8:23 AM	Rate (0)
DerJunge Posts: 22 Rating: (0)	Hi Late We've done the similar thing. Our Coros LSB system was running on a OP47, but our harddisk failed. Then we loaded the system to another Pc (Including CP1413). It is working, we're getting the datas and communication is fine. But, after we change anything in LSBSET and save the configuration communication faults. After restarting PC, the communication Faults and gives error message "Process Link Faulty" in Coros Runtime Message Line. I want to now, is it COROS's protection done by Siemens? Don't we have permission to change anything in LSBSET? By the way, we are trying to change the port of printer LPT1 instead of COM1 SerialInterface. Your answers will be appreciated Best Regards DerJunge
DerJunge Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on