Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Communication Siemens relays with ABB RTU560 using IEC61850

Created by: Behrad at: 6/22/2012 7:23 PM (13 Replies)

Rating (2)

Thanks 4

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

3/14/2013 2:50 PM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 12/18/2025 Posts: 1295 Rating: (116)	Hi if by vertical communication you mean just the RTU and Siprotec, you don't have to import the CID again to Digsi. Siprotec doesn'T need any kind of information from the client, apart from IP Address, if you want to restrict it. If you want to exchange GOOSE messages between devices, then you need to import the CID from ABB into Digsi. Mike
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users faezee

3/15/2013 9:43 AM	Rate (0)
ensark2 Bronze Member Joined: 11/18/2009 Last visit: 12/31/2025 Posts: 263 Rating: (18)	Evanecan, I have before connected Siprotec devices to RTUs other then Siemens. As Mike said there is no need to import file back to Digsi. This is only necessary for GOOSE. Just give correct IP address to Siprotec. Define static reports if RTU need them. Best Regards Ensar

Suggestion To thank Quote Answer

3/15/2013 12:12 PM	Rate (0)
evanecan Posts: 3 Rating: (0)	Thank you very much. It works nicely. I tested for analog values and continue to testing.
evanecan Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

2/17/2024 11:33 AM	Rate (0)
AutoGen_7130570 Posts: 1 Rating: (0)	hi i am trying to configure ABB numerical realys in IEC61850 protocol with sicam scc i am doing it for first and i don't know how
AutoGen_7130570 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SICAM

Follow us on