I have one project that need to get actual current value of Sinamics V20 via analog output, but I saw in the manual there are only frequency output available. Could someone help me to change analog output value from frequency to current?

Analog output setting is in P0771

Yes you can. What you have to do is change the value of P0771[0].

You can set the analog ouput to display one of the following:
21 - Actual frequency
24 - Actual ouput frequency
25 - Actual output voltage
26 - Actual DC-link voltage
27 - Actual ouput current

All the above will be scaled to P2002.

If you cannot find P0771 make sure that User access level (P0003) is set to at least 2.

If you need the AO to show absolute value you have to change P0775[0] to 1.

New question published by Prabhjot Singh is split to a separate thread with the subject How to take 0 to 10vdc as analog output from sinamics v20?.

Best regards
Jen_Moderator