Hi,

Is it possible to use sinamics G120 drive as a recoiler drive? If so, would you please give me some guidelines.

SKG

Hi. SKG.
You mean that is "recycle drive" when the some kind of drive such as G120 type are loading and unloadingusing voltage controlrelated to programmable of G120I think theymight be havingsome troubles because of it is really serious condition of mainterenceeven if you are good at professional driver engineer. Also, it can be modified relevant application of coverage as long as youmakesense ofin this way bases on manual of sinamicstypes of G120 that kind ofablityforcooperate and manipulatebefore commissioning to be complie and concentrate as far as you can. even you make sure to be designed and delectionin this casued whatever the reasonthat isbrcauseit is really important toreconsider how tocooperate for good method in case having some problem unlessyouhave any solution when i comes toG120. That is why you are cosidering for your system.
If Iwere you, Ican`t be avaiblei am not sure because of it is so dengous of you to be pote.
Anyway. if you have any problem the same as drive once again in spite ofI should give some advises for you, feel free to contact me.
thank you.

New question published by Friends_100000 is split to a separate thread with the subject Sinamic G120 Driver: control the same using another PLC.

Best regards
CS Moderator