hello

I bought new  profinet push button panel.  6AV3688-3AY36-0AX0    SIMATIC HMI KP8 PN

I can't add it to my hardware cause it does not exist in Simatic Manager V5.5.In manual it says you can find gsd online. But i could not find it. Can you help please?

Please check this link how to foresee gsd in your hardware config .

And look also at this manual @ page 57.

And maybe this example project might help...

I found gsdml file here. kp8 pn gsdml file

New question published by Damayanti is split to a separate thread with the subject How to configure different colors for one LED and use Push button to switch on and off the remote device?.

Best regards
Jen_Moderator