I need to duplique a HMI TP1200 to install in a remote station but  I  need to use a KTP700 , I know that the screen is more small , I use Copy and Paste but i Loss 50% of the screen

It's posible to REduce a Screen in TP1200 Copy and paste to KTP700

I Do KTP700 to TP1200 and work good only I need to ajust the dimension

lsoto

I need to duplique a HMI TP1200 to install in a remote station but  I  need to use a KTP700 , I know that the screen is more small , I use Copy and Paste but i Loss 50% of the screen

It's posible to REduce a Screen in TP1200 Copy and paste to KTP700

I Do KTP700 to TP1200 and work good only I need to ajust the dimension

 Mr.lsoto

it is not possible to direct with use of change device so you should do it manually with use of different

project ,in tp 1200 you should create screen as group and resize then copy it to ktp 700 project.

i hope this may help you.

Hello Isoto,

Perhaps you can try to copy first to an other TP1200.

Go to "Options -> Settings -> Visualization" select 'resize screen' and here you select 'fit to screen'

Then you use "Change device" to KTP700

Best regards,

Wizard

New question published by igor62il is split to a separate thread with the subject TIA V13, How I can copy and paste screens from one project to another?.

Best regards
Min_Moderator