Hi everyone,

I have same problem that I had already installed WinCC RT professional update 9. What I want is start runtime on PC(installed WinCC RT professional) with real PLC. But the button "Start runtime on PLC" still not active. Then I try to make .mcx file by go "Online" >Download to file system. After that I run WinCC RT start and select the file and run it. But it still don't work when I hit the button "start" and "stop" (My PLC is already in Run mode).  And PC IP is the same with PC_system1. Please see the attach files.

Can someone tell me Procedures to start runtime on PC with real PLC? plz help. Thanks!

------------------------------------------------------------------------------------------
Split from How to run real RunTime on PC for TP1200.

Hi ChristophD ,

Thank you very much! You made my day :))

Best regards,

Tien

QThangdotnet

Bạn khắc phục như thế nào v?

 Hello,

You can do it by following steps:

S1. In your HMI tree > Connections> At the "Access point" choose "S7 ONLINE". But make sure you already have HMI connection. Please see the picture I attached below ( Chỗ Access point  chọn S7 ONLINE nhé, xem ảnh để rõ hơn)

S2. Control panel > you search " Set PG/PC interface" > In the "Access point Application" select "S7 ONLINE --> Driver (Realtek PCIe...)

Hope this helps,

Brs,

Tien