SFC 14 and SFC15 are giving error as a return val of : -32624

Whats it meaning?

Regards,

ddg

------------------------------------------------------------------------------------------
Split from SFC 14 and SFC 15.

Hello,

this means 8090hex = problem with the parameter LADDR.

Regards

Christoph

Dear Sir,

First of all thanks for your reply.

I have gone through Help file for SFC14 for error 8090 and below possible conditions are covered.

1. Module configured and available. (Consistent over :Unit)

2. 48 word both in HW and Program.

3. Start address 1500 , HEX 5DC.

What could be the issue?

Regards

DDG

Hello,

which device is this exactly (manufacturer, Type name?)

Can you attach the GSD File you use?

Regards

Christoph

Its Micro-Tech™ 9000 from Thermo Scientific. (Belt scale)

.gsd file shared.

Thanks 

ddg

Dear Mr Christoph

Any valued suggestion.

Regards,

DDG

hi,

I´m not an expert in GSD-files, but I read the content.

GSD content

;------------------------------------------------------
;
; Buffers dimension
;
; Standard buffer dimension is :        48 words read buffer  (0x6F)
;                                       48 words write buffer (0x6F)
;
;
; Dimensions can be changed by modifing the last two value in the
; 'Module' definition below.
; The value should be obtained as follows:
;
;       64 + WB_WN - 1      or         64 + RB_WN - 1
;
; where WB_WN is the wished words number for the write buffer, RB_WN is
; the wished words number for the read buffer.
;
; The value should be converted in hexadecimal format. Default value
; hex 6F corresponds to:
;
;       64 + 48 - 1   ->   111 dec  ->   6F hex
;
; WB_WN and RB_WN values must be entered also in the instrument setup
; in decimal format.
;
;
;                     Write buffer ----+          +---- Read buffer
;                                                 |           |
;                                                V          V
;
Module = "MT9000" 0xC0,0x6F,0x6F
1
EndModule
;

 for me, it seems that you can modify the GSD for your real requirements and settings of the device.

(correct me if I´m wrong)

how are the settings on the device? can you set an input- or output-area? is the area more or less than 48 words?

regards,

First of all thanks for your reply.

For both side its 48 words send and 48 words receive.

Node is healthy but error in data exchange.

The error code is 8090 which reflects the following reasons as per Siemens.

·

You have not configured a module for the specified logical base address or · (GSD file added as )

you have ignored the restriction concerning the length of consistent data or· (at both side its 48 word)

you have not entered the start address in the LADDR parameter in hexadecimal format.( 1500 means 5DC in Hex )

Regards,

ddg

Any valuable solutions.

Regards,

ddg

Waiting for Reply.

Regards

ddg