Dear All,

I want to simulate communication between two ( CPU 319-3 PN/DP ) by using ( TCOMMUNICATION BLOCKS (T-CON,T-RCV,T-SEND) and ( PLCSIM V5.4_SP5_UPd2)

I have used OPEN COMMUNICATION  WIZARD TOOL  to get connection parameters UDT.

and after download program on both CPUs I found output ( T-CON.DONE = true) even I removed second plcsim ,even I did not trigger (T-CON.REQ).

so I think i have something wrong.

Thanks in advance

elsayed

Hi Mop,

1st CPU ( CPU 319-3 PN/DP ) IP-address 192.168.1.10

2nd CPU ( CPU 319-3 PN/DP ) IP-address 192.168.1.20

Connection Type TCP/native

My questions:

1- why output (TCON.DONE = true ) without request connection. ( another words how can i check connection established or not ).

Thanks and sorry for confusing.

elsayed

Hi Mop,

Please check the attachment.

is this information sufficient for you 

Thank you 

elsayed

New question published by moelsayed is split to a separate thread with the subject Does PLCSIM support only S7-CONNECTION blocks and does not support OPEN COMMUNICATION BLOCKS?.

Best regards
Jen_Moderator