I tried with password, without, I tried LOGO Logo logo LOGO! etc etc for 3 weeks I can not sort it out. I've installed Logo comfort on a different computer and tried to connect on different router.I think I tried everything but with no luck.

I am sure that my settings are good because I can without any issue connect to the webserver from any place that I want, It looks like the issue is only with Logo Comfort.

If you have any ideas what that could be please let me know!

Thank you!

My Logo : 6ED1052-MD08-0BA0

Logo Comfort: V 8.1.0 

Hello,

thank you for a quick reply.

I have only one logo in my network.

In access control I have checked the box to allow this. 

I always try without http://, with this I don't get a green bar.

To both questions : yes 

Ive changed the remote password and checked the box like 100 times. It asks you to set logo to RUN mode so I tried every possible combination. Also without password, with longer password etc

I have exacly as you wrote : (IP space : space Port) and it looks OK when you click "connect" (attached) but if you want to do something it asks for the dumb password...

ixo65

You entered by address a numerical IP address? Is this your DynDNS address?

Have you tried with the Password that yo have entered by the remote control in the access control?

 Yes it is my static IP adress. With this IP:8080 I can enter in any browser from any place the webserver and have a look what's my Logo doing.

I tried also with NO IP Dynamic DNS, it only converts the numerical to a written adress but the issue with password was the same.

I tried of course to put the password from remote access also from desperation I tried the PW from webserver and any possible combination of LOGO logo etc. 

I cannot understand how I can access the webserver with no problems but it is not possible to do anything in Logo comfort software...

Hello kill_gil 

Try with port 80 instead of 8080. It might work. 

Hello,

Perhaps the following points might help:

1-How do you enable and call the web server on LOGO! 8?

2-Port forwarding in the router setting"Remote side":

LOGO IP Address

Office PC"Local side":

http://public IP Address:8080

or

http://domain:8080