![Rated: no ratings [0 out of 5 / rated 0 time(s)].](https://www.automation.siemens.com/forum/Skins/images/Star0.post.gif)
(0) Dear Sir or Madam
Hi hope you'refine.
I'm having issue with my siemens controller unit 840d.the model and type of the machine which i'm working with is Durma cnc machine(RP9).my problem is that when the sinumerik boots up the keys on the controller unit panel starts flashing and it goes on for like hours and i have to leave it on for hours until it stops flashing.i assume that the connection between the plc and the panel might be wrong but i'm not sure.it's been like that for days.I would be really grateful if you could help me to eliminate this annoying issue.
your kindness and prompt attention will be highly appreciated.
Yours faithfully
Nima
Navigation
when the sinumerik boots up the keys on the controller unit panel starts flashing
Created by: Nifash at: 11/26/2013 8:22 AM (2 Replies)
Rating 
Thanks 0
3 Entries
| 11/26/2013 8:22 AM | ||
|
Posts: 3 Rating:
|
|
|
Last edited by: O_Moderator at: 11/29/2013 8:40 AMnew subject after splitting from /tf/WW/en/Posts/74805#top |
||
| 11/27/2013 1:56 AM | |
Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating:
|
hi, Do u get any alarm on the Screen (OP)?? If not Check the Profibus Connection from OP to MCP. |
|
Regards, |
|
Follow us on