Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S71200 SIMULATION WITH S7 PLC SIM V13

Created by: gullfjun at: 7/29/2014 12:02 PM (4 Replies)

Rating (1)

Thanks 3

5 Entries

7/29/2014 12:02 PM	Rate (0)
gullfjun Posts: 1 Rating: (0)	Hello! The simulation does not work for v13 when s7-1200 is used? We use the V13 but the simulation box is gray and can not be clicked on. So I guess it does not work then either? Why does not it work for s7-1200? Do you know if the simulation tool being worked to bring up to s7-1200? And if that does not work is there any other program I can use?
gullfjun Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 7/30/2014 4:08 PM new subject after splitting from /tf/WW/en/Posts/89790#top
Suggestion To thank Quote Answer

7/30/2014 11:01 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/6/2024 Posts: 15385 Rating: (2443)	gullfjun Hello! The simulation does not work for v13 when s7-1200 is used? We use the V13 but the simulation box is gray and can not be clicked on. So I guess it does not work then either? Why does not it work for s7-1200? Do you know if the simulation tool being worked to bring up to s7-1200? And if that does not work is there any other program I can use? If you have the professional version of TIA Portal V13, you can make a s7-1500 project and copy most if not all of your 1200 project over to the 1500 and simulate that way. Some of the 1200/1500 specific function blocks may not work or compile of course.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Gabriel de Oliveira Mo.Sa

7/31/2014 7:56 AM	Rate (0)
William_B Posts: 5225 Rating: (1195)	huggy_d1 If you have the professional version of TIA Portal V13, you can make a s7-1500 project and copy most if not all of your 1200 project over to the 1500 and simulate that way. Some of the 1200/1500 specific function blocks may not work or compile of course. This message carries my coffee stain stamp of approval. [smile] Seriously though.. I use the S7-1500 simulator to simulate S7-1200 code and I am happy with the results. Be careful to do the design for an S7-1200 first and then plan this over to an S7-1500. For a simple example: S7-1500 can handle STL while S7-1200 will not. If any follow-up questions come up.. please ask. w
William_B Posts: 5225 Rating: (1195)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Gabriel de Oliveira

10/8/2014 9:40 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Follow upquestion published bysaleh is split to a separate thread with the subject HMI with winCC software to simulate (without PLC and HMI). Best regards Min_Moderator

Suggestion To thank Quote Answer

10/16/2014 3:42 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published byHWIrui is split to a separate thread with the subject V13 TIA portal, import a program already made to the PLCsim and make the simulation. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on