Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DCM GSD file for TIA Portal

Created by: ANNE@ at: 8/21/2014 9:18 AM (10 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

11 Entries

Entries per page: 10 | all

8/21/2014 9:18 AM	Rate (0)
ANNE@ Member Joined: 8/21/2014 Last visit: 10/15/2024 Posts: 9 Rating: (0)	Team, Can you help me, where ican get theGSD file of Sinamics DCM 6RA80 for TIA portal V12 Regards, Anne

Suggestion To thank Quote Answer

8/21/2014 9:30 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/12/2024 Posts: 22446 Rating: (3029)	Hello, download is here Regards Christoph

Suggestion To thank Quote Answer

8/21/2014 12:35 PM	Rate (0)
ANNE@ Member Joined: 8/21/2014 Last visit: 10/15/2024 Posts: 9 Rating: (0)	Thank you for your support. I downloaded these files and tried to upload in TIA, but we are unable to do that, because while browsing for file, downloaded file not appearing in the list. Please suggest how to upload to TIA V 12

Suggestion To thank Quote Answer

8/21/2014 12:53 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/12/2024 Posts: 22446 Rating: (3029)	Hi, what do you do? This ist not a HSP or SSP, this are GSD Files to install! Steps: download the zip File extract the zipfile to a local directory in Tia Menu -> Options -> Install general station description files(GSD) browse to the folder which contains the extracted GSD Files select the files to install done the devices then show in the HWCatalog: Other Field Devices -> PROFIBUS DP -> Drives -> SIEMENS AG Regards Christoph
	Last edited by: ChristophD at: 8/21/2014 12:54 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users esein

8/21/2014 12:58 PM	Rate (0)
ANNE@ Member Joined: 8/21/2014 Last visit: 10/15/2024 Posts: 9 Rating: (0)	I did the same procedure. but file is not viewing whle browsing. System is loaded withwindows 7 64Bit Thanks and regards, Anne@

Suggestion To thank Quote Answer

8/21/2014 1:08 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/12/2024 Posts: 22446 Rating: (3029)	Hello, please can you make a screenshot from the directory which contains the GSD files, and the file browse dialog from tia in which you can't find the files? In the brwosing dialog you can only select the directory wher the files are stored, not the files itself! Regards Christoph
	Last edited by: ChristophD at: 8/21/2014 1:12 PM
Suggestion To thank Quote Answer

8/21/2014 1:20 PM	Rate (0)
ANNE@ Member Joined: 8/21/2014 Last visit: 10/15/2024 Posts: 9 Rating: (0)	Thank you for your support. I re-started the TIA and did the same procedure now i am viewing DCM in other field divices. Regards, Anne

Suggestion To thank Quote Answer

8/21/2014 1:30 PM	Rate (0)
ANNE@ Member Joined: 8/21/2014 Last visit: 10/15/2024 Posts: 9 Rating: (0)	Shall weget these DCM drives in drives and Starters like sinamics G120? Regards, Anne@

Suggestion To thank Quote Answer

8/21/2014 1:45 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/12/2024 Posts: 22446 Rating: (3029)	Hi, no, in this folders are only drives which can be configuredby TIA STARTDRIVE. For DCM this is not possible. To configure the drive DCM you must use the STARTER Tool, the communication Interface (Telkegramms) for DCM in TIA only via GSD. Regards Christoph

Suggestion To thank Quote Answer

8/21/2014 1:56 PM	Rate (0)
ANNE@ Member Joined: 8/21/2014 Last visit: 10/15/2024 Posts: 9 Rating: (0)	Thank you verymuch for your support. Regards, Anne@

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on