Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to appear current value of timer S5T on wincc flexiable

Created by: mokhakram at: 11/10/2014 7:25 PM (8 Replies)

Rating (0)

Thanks 1

9 Entries

11/10/2014 7:25 PM	Rate (0)
mokhakram Posts: 21 Rating: (0)	how to appear current value of timer S5T on wincc flexiable ,how can i make a tag to this type of timers in order to tie it with wincc flex
mokhakram Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/10/2014 7:46 PM	Rate (0)
VVago Posts: 784 Rating: (52)	Hello, Perhaps thislinkmight help. Best regards......
VVago Posts: 784 Rating: (52)
Suggestion To thank Quote Answer

11/10/2014 8:27 PM	Rate (0)
mokhakram Posts: 21 Rating: (0)	i need it for timer of type S5T
mokhakram Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/10/2014 9:22 PM	Rate (0)
Panov69 Silver Member Joined: 11/17/2010 Last visit: 9/12/2024 Posts: 216 Rating: (40)	Hello, To read current time (=Preset time value - Elapsed time) of Tx timer, you have 2 solutions : - L Tx -> Load current time in ACCU 1 as integer. - LC Tx -> Load current time in ACCU 1 as BCD. Look at this link here chapter 12.4 and 12.5. Regards.
	Last edited by: Panov69 at: 11/10/2014 9:25 PM Last edited by: Panov69 at: 11/10/2014 9:23 PM
Suggestion To thank Quote Answer

11/10/2014 10:13 PM	Rate (0)
MicroMan Platinum Member Joined: 11/29/2011 Last visit: 12/16/2024 Posts: 1361 Rating: (232)	mokhakram how to appear current value of timer S5T on wincc flexiable ,how can i make a tag to this type of timers in order to tie it with wincc flex Body, The issue you are having is that S5T is an old datetype consist of 3 parts. 4 bit time base an 3x4bit value (BCD). You need to convert this primitive "structure" to integer. STL/SCL is the best way to do it. Check out this FAQ: https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=s5time+type&ID=1851190&ehbid=1851190 Cheers Was it useful? Rate it!
	- What you read here, please check with manuals and your requirements. - Do not forget to Test, Test and Test... - If the post is helpful, please RATE it! MicroMan
Suggestion To thank Quote Answer

11/11/2014 12:37 PM	Rate (0)
mokhakram Posts: 21 Rating: (0)	i dont ask about conversion between data types, i ask about the tag formate that will be written in tags in order to tie the S5T current value with wincc flex
mokhakram Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

11/11/2014 12:53 PM	Rate (0)
MicroMan Platinum Member Joined: 11/29/2011 Last visit: 12/16/2024 Posts: 1361 Rating: (232)	Have a look at this: http://support.automation.siemens.com/WW/view/en/23992560
	- What you read here, please check with manuals and your requirements. - Do not forget to Test, Test and Test... - If the post is helpful, please RATE it! MicroMan
Suggestion To thank Quote Answer

11/11/2014 2:21 PM	Rate (0)
Panov69 Silver Member Joined: 11/17/2010 Last visit: 9/12/2024 Posts: 216 Rating: (40)	mokhakram i dont ask about conversion between data types, i ask about the tag formate that will be written in tags in order to tie the S5T current value with wincc flex If you are talking about timer T1 (for exemple), you have just to write following lines : L T1 (Load current time in decimal = Initial time - elapsed time) T MW10 and create tag pointing on MW10 in WinCC.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mugurelgi5

11/11/2014 8:38 PM	Rate (0)
mokhakram Posts: 21 Rating: (0)	Thankyou thats really what i need
mokhakram Posts: 21 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on