Navigation
6se7015-0ep50, i want change to terminal input analog and strip
Created by: amircontrol at: 11/25/2014 8:38 AM (1 Replies)
Rating 
Thanks 0
2 Entries
| 11/25/2014 8:38 AM | |
|
Posts: 15 Rating:
|
HI I have a master drives 6se7015-0ep50 . that already configuration fixed setpoint mode and operation . i want change to terminal input analog and strip but i did not doing . you help me do . i change p368.01=1 p443.01=10 conection x101/9 and 10 to 0-10 volt dc x101/7 +24 x101/8 on/off p544.01=20 p561.01=18 but no run drive . i send you back up and you configuration start up with analog input and terminal . so thanks --------------------------------------- New subject after splitting from 6SE7012-OTP50 and 6SE7023-4EP60 issue. Attachment15 daf MC Plus_tmp.zip (409 Downloads) |
Last edited by: Min_Moderator at: 11/25/2014 3:59 PMSplitted |
|
| 11/25/2014 4:07 PM | |
|
Posts: 4758 Rating:
|
|
Follow us on