Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIPART DR24 With serial interface communication

Created by: mbtoy at: 6/19/2009 7:49 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/19/2009 7:49 AM	Rate (0)
mbtoy Posts: 14 Rating: (0)	Hi everybody I need to communicate between S7-300 CPU with CP340and SIPART DR24 with serial interface. Is it available somewhere example code or function block to use in my application. Thanks in advance
mbtoy Posts: 14 Rating: (0)	Last edited by: mbtoy at: 6/19/2009 7:49 AM
Suggestion To thank Quote Answer

6/24/2009 8:42 PM	Rate (0)
SonicRanger Posts: 151 Rating: (8)	Hi mbtoy, as far as I know, the protocol over the serial interface is notopen, so that will be a hard job. You can save yourself a lot of headaches by buying a profibus DPinterface for the DR24, Siemens provides standard function blocks and GSD files for it. Good luck, SonicRanger.
SonicRanger Posts: 151 Rating: (8)
Suggestion To thank Quote Answer

8/19/2009 10:22 PM	Rate (0)
mbtoy Posts: 14 Rating: (0)	Hi I've purchased DP interfaces,but didn't get a CD with function block and GSD Do You know where i can find them?
mbtoy Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

8/20/2009 7:52 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 12/2/2024 Posts: 10229 Rating: (1181)	Hello, Look at Siemens - Industry Automation and Drive Technologies There you'll find all necessary info. Perhaps also example... Reagrds, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIPART

Follow us on